Bossdim Dimmer Switch (also via Bang & Olufsen remote control)
Beo4 & Beo5 Remote Controls only (not included)
Origin: Denmark
With the new BossDim from BOSSCOM you can control the light with your Bang & Olufsen remote control. You can place the BossDim:
- on the floor
- on the table
- mounted on the ceiling
- mounted on the wall
Why BossDim?
- Can control up to 200 lamps
- Can make individual light for each lamp
- Can remember your light dimming for each lamp
- Made in massive aluminum (cover)
- Easy to install
- Universal, support almost all bulbs
- No noise when dimmed
BossDim can be installed direct on the power cord wire for the lamp or replace the power switch on the wall. The BossDim minimalistic design makes it easy to integrate in a modern home.
By installing more BossDim dimmers it’s possible to remote lamps individual. It’s also possible to make different light scenarios that for e.g. reading, cleaning or a optimal AV experience.
BossDim can be used together with following sources of light:
- 230V incandescent lamp
- 230V halogen lamp
- Low voltage lamp provided with a electronic transformer
- Low voltage lamp provided with a electronic iron kernel transformer
- Low energy light source
- BossDim can be connected direct to 40-300W lamps
Download User Manual
WARNING!!
Make sure 230 vac is supplied from the left when yellow capacitor is pointing down. Else dimmer will be damaged. After wires are installed you can mount the dimmer in any direction.
- Load: 230 vac, 40 to 300 Watts
- Controls: Normal light bulbs, halogen lamps with (electronic) transformer
- Material: Aluminia
- Plasma-sensitive: Yes (not protected)
Size: Dia 9.3 cm, Depth 3 cm. - Weight: 140 grams
